Isollation Module For Addressable Type System

Get a Price/Quote

Product Details:

Sensor Type Electronic module (communication isolator)
Working Current < 4.5mA (isolated condition)
Sensor Life 10 years typical
Sensor Cable 2-wire loop, 1.0-2.5mm2 recommended
Suitable For Intelligent/Addressable Fire Alarm Systems
Voltage 24V DC nominal (18-30V DC operating range)
Standby Current < 0.6mA
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Isollation Module For Addressable Type System Price And Quantity

Minimum Order Quantity 10 Unit

Isollation Module For Addressable Type System Product Specifications

Standby Current < 0.6mA
Alarm time Continuous, until fault is cleared
Alarm Light Color Yellow (Fault), Green (Normal)
Control Distance Dependent on system design, typically up to 1.5 km
Detection Range Up to 100 meters (depends on loop configuration)
Alarm startup time < 1 second to isolate fault
Wireless NO
Sensitivity Not applicable (module function)
Noise Level Silent Operation
Sensor Type Electronic module (communication isolator)
Sensor Cable 2-wire loop, 1.0-2.5mm2 recommended
Sensor Life 10 years typical
Working Current < 4.5mA (isolated condition)
Suitable For Intelligent/Addressable Fire Alarm Systems
Power Supply 24V DC (from addressable loop)
Voltage 24V DC nominal (18-30V DC operating range)

Dimensions 90 x 60 x 30 mm (approx.)
Mounting Type DIN Rail or surface mount (box type)
Ingress Protection IP30
Housing Material Fire retardant ABS plastic
Wiring Non-polarized loop connection
Operating Temperature -10C to +50C
Relative Humidity 95% RH (non-condensing)
Indication LED indicators for normal and fault status
Weight 85g

Isollation Module For Addressable Type System Trade Information

Payment Terms Cash in Advance (CID)
Supply Ability 1000 Unit Per Month
Delivery Time 5-7 Days
Main Domestic Market All India

Other Products in 'Fire Alarm System Equipments' category

Addressable Type Fire Alarm System Minimum Order Quantity : 10 Sensor Cable : Twowire, twisted pair, shielded (per EN 5417) Working Current : 0.5A (system dependent) Power Supply : AC 220V/50Hz or DC 24V Voltage : 24V DC (typical device operation) Suitable For : Other, Commercial buildings, malls, hospitals, hotels, industrial facilities Standby Current : 0.1A (system dependent) Detection Range : Up to 1000 m2 per loop (typical) Noise Level : 85dB at 1 meter (alarm base) Alarm startup time : 3 seconds Wireless : Other, No, wired system Alarm Light Color : Red Alarm time : Continuous until reset Sensor Type : Photoelectric Smoke Sensor, Heat Sensor (optional modules available) Remote Control : Other, Supported via system panel or management software Sensitivity : Adjustable (per EN54 or manufacturer standard) Control Distance : Max 1500 meters per loop Sensor Life : 10 years (smoke detector), 5 years (heat detector) Alarm Density : 0.10.3 dB/m (smoke), 57C67C (heat)

Send Inquiry

32 Zone Fire Alarm Panel Minimum Order Quantity : 10 Sensor Cable : 2core, 1.5 sq mm (recommended) Working Current : 400 mA (alarm condition, approximate) Power Supply : AC 230V 10%, 50Hz; Battery Backup 24V DC Voltage : 24V DC internal, 230V AC input Suitable For : Other, Large buildings, offices, factories, commercial complexes Standby Current : 150 mA (approximate) Detection Range : Up to 100 meters (depends on detector type) Noise Level : 85 dB or more (internal buzzer) Alarm startup time : Within 3 seconds Wireless : Other, No (wired system) Alarm Light Color : Red Alarm time : Continuous until reset Sensor Type : Compatible with smoke, heat, and manual call point sensors Remote Control : Other, Supported via key switch or remote module Sensitivity : Adjustable (per zone) Control Distance : Up to 1 km (with suitable cabling) Sensor Life : Typically 510 years (sensor dependent) Alarm Density : Programmable per zone

Send Inquiry

Monitor Moduler For Fire Alarm System Minimum Order Quantity : 10 Sensor Cable : Twisted Pair, 1.5 mm2 recommended Working Current : < 1.5 mA (alarm condition) Power Supply : 24V DC (loop powered) Voltage : 18V28V DC Suitable For : Other, Fire alarm system, input signal monitoring Standby Current : 0.45 mA (loop powered) Detection Range : Up to 1500 m2 (depends on installation) Noise Level : N/A (device is silent, no sound output) Alarm startup time : < 3 seconds Wireless : Other, No, wired type Alarm Light Color : Red LED indicator Alarm time : Programmable, default 20 seconds Sensor Type : Input monitoring (NO/NC contact) Remote Control : Other, Supported, with compatible panel Sensitivity : Selectable, software configured Control Distance : Max. 1500 meters from control panel Sensor Life : 10 years typical Alarm Density : Monitors single or dual input point

Send Inquiry

4 Zone Fire Alarm Panel Minimum Order Quantity : 10 Sensor Cable : 2core firerated cable (recommended) Working Current : <250 mA Power Supply : 230V AC, 50Hz Voltage : 24V DC (internal output) Suitable For : Other, Small to medium commercial, industrial, and residential buildings Standby Current : <120 mA Detection Range : Up to 30 meters (depends on detector) Noise Level : 8090 dB (internal alarm sounder) Alarm startup time : <2 seconds Wireless : NO Alarm Light Color : Red Alarm time : Continuous until reset Sensor Type : Compatible with Smoke and Heat Detectors (Conventional type) Remote Control : No Sensitivity : 35%/ft (for smoke detectors, panel compatible) Control Distance : Up to 200 meters (with suitable wiring) Sensor Life : 510 years (depends on detector used) Alarm Density : 0.030.05%/ft (for smoke, panel compatible)

Send Inquiry

SEND INQUIRY CALL ME FREE